Paul,

Do you or anyone know the weight of the automatic flexplate with the
starter ring attached?

Thanks

Doug - shaking  in Japan.

I have one up at the hangar but not planning on going there
in the next couple of days. Figure the volume of a 12 inch disk of 3/16 thick
steel at a density of .3 pounds per cubic inch. Then take half of
that for the large holes and you will have a good guess.

Paul Lamar

On my old spring style postal scale my AT flex plate weighs 1.83 kg [4 #].
Interestingly the balance that it bolts to is also 1.83 kg. The bolt
ring weighs .12 kg [.264 #]. and the six bolts that hold these three pieces
together are .12 kg too.

John

6 x 6 x 3.1416 x .187 = 21 cubic inches at .3 pound per cubic inch is 6.34 pounds
half of that is 3.17 pounds not that far off :)