Subject: Rod ends 801 rear strut
From: Rotary Engine
Date: 6/14/2008, 9:15 AM
To: AAA Put this in the To box



How much deviation from perpendicular can rod ends tolerate?   We have
a 2 degree thrust off set reflected in the bracket on the back of the
pan which must tie into the bracket on the firewall which is not
affected by the off set. Since there is a rod end at each end, the
affect is 1 degree in each rod end.   Jerry

 Move the brackets on the back of the oil pan and twist the rod end where
it screws into the other one.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.