I just invented a cheap book shelf that is ten times stronger and stiffer
than a plain wood book shelf. It matters not if the 20 gage (.020 thick)
steel sheet is glued to the 3/4 birch ply on the bottom or the top.
Do you want to know how it works?
Google neutral axis of beams.
The neutral axis of the beam is moved towards the high strength and
high stiffness
cheap 20 gage steel sheet.
Paul Lamar
Just a short "smart Alex" answer.
Y, the distance from the neutral axis to the most outer cross section is
essentially doubled, from half thickness to full thickness.
So the strength is 2^2 or about 4 times higher.
The concept is certainly correct. An easy way to increase strength of
those sagging book shelfs.
However, you need a good bond between the two. If they slide then the
formula is different, more or less as it was before.
Rolf
I agree Rolf.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.