Doug,
1792 grams, 63.21oz, 3.95lb.
George ( down under)

The flexplate weights vary by generation (and year?).  Here are a few I
have measured:
S4 - 1913g + 120g plate + 122g for 6 bolts
S5 - 1891g + 242g plate and 6 bolts
S5 - 1840g + 256g plate and 6 bolts
S6 - 2251g + (bolts included?)

Here are the numbers for an 87NA automatic rotating assembly:
Front CW + washer - 1274g
Front Rotor "D" - 4609g
Rear Rotor "C" - 4633g
Rear CW - 1861g
flexplate - 1913g + 120g plate + 122g for 6 bolts
eshaft - 6788g

Cheers
Cary

Cary,
What other weights do you have recorded?
George ( down under)

Hi George;

I almost addressed that last bit to you :)
I have weighed a lot of stuff - unfortunately, my record keeping is not
as good as my gram scale measurements.
What in particular are you/others looking for?
I have never bothered to collect a full set of letter rotor weights
measurements.

Cheers
Cary

Cary,
Nothing in particular, just wondered if you have a good record of weights,
they always seem to come in handy.
I will know who to ask in the future, if I need anything.
George (down under)


I got lots of weights :)