Subject: Higher power for your rotary.
From: Rotary Engine
Date: 6/16/2008, 11:07 AM
To: AAA Put this in the To box



..................
That drastically cuts the size and weight of the car improving the MPG.

Bob W please check my arithmetic.

-
Paul Lamar ...No rotor no motor.

Good thinking.

Just looking at the math, since Force is M * acc, and with constants
removed F = M *n^2

If mass M1 is .25 M, reduced by a factor of 4 , n1^2 is allowed to go up
by a factor of 4 for equal force.
So n = sqrt of n^2 or n1 = sqrt of 4 = 2n,
If the first n with cast iron rotor is 11,000 rpm the new n1 with BAB
rotors is 22,000 rpm, roughly. (depending on the exact weight ratio)

Wonder what BAB will cost compared to 'standard' Al alloys, or compared
to the presently used cast iron rotors.
The thermal stability of cast iron is higher than that of Al-alloys. ABA
would have to be closer to cast iron to take the beating in the Rotary
engine.

Rolf

Thanks Rolf.
I think you mean ABA instead of BAB?  Aluminum-Bryllium Alloy
is closer to cast iron than aluminum.

Paul Lamar


Sorry Paul, you are right, of course.
BAB to mean ABA, the devil is in the detail. :)

Mostly wrong, I managed to have it right once. :)
Very poor average.

Rolf


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.