Subject: Higher power for your rotary.
From: Rotary Engine
Date: 6/17/2008, 6:36 PM
To: AAA Put this in the To box


 > Paul,
 > I have used Be-38AL alloy that is now sold as AlBeMet162 by
BrushWellman.
 > The following link will give you very good material properties data.
 >
 > http://www.berylliumproducts.com/Attributes.aspx?id=AlBeMet162
 >
 > The main issue would be wear in the apex seal and corner seal areas
(would
 > need a hardened insert). The side clearances would also have to be
looser,
 > as this grows more than cast iron. On the up side, the coefficient of
heat
 > transfer is very good. This would make charge cooling more effective for
 > those engines, and oil cooling more effective on mazda style.
 > And boy would these be expensive parts.....
 > Although.... it tig welds very nicely, so a multi part rotor could be
made
 > and welded together.....
 >
 > Anyone with a big pot of money? :)
 >
 > Larry
 >
 > Agreed and all good observations. Not something we can do but certainly
 > within what Mazda can do. Thanks also for the fabrication tips.
 >
 > -- > Paul Lamar ...No rotor no motor.

Larry,
So roughly, how much cost in material alone in a rotor, just out of
curiosity.
George (down under)

It should also be mentioned that most Beryllium products emit
toxic gasses when heated. Maybe the alloy is less dangerous?
I know some technicians that nearly killed a famous motorcycle
rider when they made some brake rotors from beryllium. The
repeated inhalation of the vapors can cause a material specific disease
berylliosis. Again maybe the dangers are reduced or eliminated
in the alloy.
Bill Jepson

Was it gas or was it dust?

Paul Lamar

Both items are dangerous. Heated beryllium has toxic vapors.
The dust in the lungs is what causes berylliosis.  Very nasty
stuff.
Bill J


http://en.wikipedia.org/wiki/Beryllium

"According to the International Agency for Research on Cancer (IARC),
beryllium and beryllium compounds are Category 1 carcinogens; they are
carcinogenic to both animals and humans.[10] Chronic berylliosis is a
pulmonary and systemic granulomatous disease caused by exposure to
beryllium. Acute beryllium disease in the form of chemical pneumonitis
was first reported in Europe in 1933 and in the United States in 1943.
Cases of chronic berylliosis were first described in 1946 among
workers in plants manufacturing fluorescent lamps in Massachusetts.
Chronic berylliosis resembles sarcoidosis in many respects, and the
differential diagnosis is often difficult. It occasionally killed
early workers in nuclear weapons design, such as Herbert Anderson [1].

Although the use of beryllium compounds in fluorescent lighting tubes
was discontinued in 1949, potential for exposure to beryllium exists
in the nuclear and aerospace industries and in the refining of
beryllium metal and melting of beryllium-containing alloys, the
manufacturing of electronic devices, and the handling of other
beryllium-containing material."

It think the primary risk is dust - metallic or salts.

Using toxic stuff in a new engine seems somewhat inelegant..  Sure,
there are already lots of materials used in the construction and
operation of aircraft (and cars) that I wouldn't want to eat or
inhale, but why add another to the list?

Sounds like cool stuff for use in tightly controlled industrial, or
_very_ low volume science applications.


Regards,

Matt-



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.