How much Beryllium is in the compound? I used to use BeCu in a high
pressure system. No special precautions were taken when machining and
berylliosis risk was well know by the machine shop. If they were
machining beryllium, it was a big deal. BeCu typically has 1-2% Be
content.
Bob W
Bob the BeAl alloy lists Beryllium at 60-63% with the remnant AL. That
is not
an insignificant amount! While this material is interesting for it's
lightness, it
hardly seems worth the other risks. This isn't like the idoicy about
Asbestos
where a 20 year exposure might cause problems. The idiots cleaning up
asbestos
in hasmat suits are protecting their phony-baloney jobs. Beryllium is PROVEN
to cause serious effects, and any sagnifigant unprotected exposure to
the dust
can cause FATAL lung disease. Good reasons to avoid using it unless nothing
else will do. A braised lightweight rotor in steel could still cut the
weight and not
need any special handling. Detonation gun coatings for aluminum side
plates and
diamond grinding sound like childs play by comparison. And we KNOW that
they
work! Mazda has even provided the type of materials in the LeMans engine
paper.
Hell the aluminum side plates would lighten the 2 rotor by 20 pounds and
the 3
rotor by a lot more than that. Since we don't really need more than
7,500 RPM
and that doesn't tax the standard e-shaft and rotors why bother? We already
have a means of doing these things that has been tested in 24 hours of
RACING
use. Seems a better way to lighten things up than working in a expensive
alloy
unproven for our use, that...oh by the way might KILL us! I think some focus
would be a good idea here. And lastly lets re-state what sent us down
this road
Current F1 engines are now approaching the power density of a rotary by
reving
to 19,000 RPM! And for some reason we might want to stress our engines in a
similar way? Just using P-ports and aluminum end plates it might take F1
another
20 years to catch up! it might be real fun to compare HP per dollar!
Bill Jepson
Your are missing the point here Bill. This is not about a light
weight A/C engine. It is about high RPM and HP. The rotor weight
controls RPM. In order to double the RPM and HP one must reduce
the rotor weight to 25% of it current 9 pound weight. You are not going
to do that with an all steel rotor. A current 2.5 L Formula 1 engine
is putting out 900 HP at 19,000 RPM while weighing about 125 KG
or about 275 pounds. You are not going to get 900 HP out of
a NA 2.6 L P-port 13B at 11,000 RPM no matter how light weight it is.
You would be real lucky to see 350 HP. This is the current rational
among the anti rotary crowd. They don't see the need for the rotary. Without
respect for the rotary there will be no rotary engines made. Unfortunately
displacement is still a yard stick for engine performance in car racing.
Yes certain precautions need to be taken in making aluminum-beryllium
alloy parts but it has and is being done done. Certain parts in satellites
and other things are made from aluminum-beryllium alloy as well as pistons.
Once the piston is in the engine there is no exposure to dust.
IMHO you are over reacting here. If we really wanted to do something
to reduce carcinogens in the air how about starting with black smoke
from diesel engines? Especially school bus engines.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.