Your are missing the point here Bill. This is not about a light
weight A/C engine. It is about high RPM and HP. The rotor weight
controls RPM. In order to double the RPM and HP one must reduce
the rotor weight to 25% of it current 9 pound weight. You are not going
to do that with an all steel rotor. A current 2.5 L Formula 1 engine
is putting out 900 HP at 19,000 RPM while weighing about 125 KG
or about 275 pounds. You are not going to get 900 HP out of
a NA 2.6 L P-port 13B at 11,000 RPM no matter how light weight it is.
You would be real lucky to see 350 HP. This is the current rational
among the anti rotary crowd. They don't see the need for the rotary.
Without
respect for the rotary there will be no rotary engines made. Unfortunately
displacement is still a yard stick for engine performance in car racing.
Yes certain precautions need to be taken in making aluminum-beryllium
alloy parts but it has and is being done done. Certain parts in satellites
and other things are made from aluminum-beryllium alloy as well as pistons.
Once the piston is in the engine there is no exposure to dust.
IMHO you are over reacting here. If we really wanted to do something
to reduce carcinogens in the air how about starting with black smoke
from diesel engines? Especially school bus engines.
-- Paul Lamar ...No rotor no motor.
Paul,
I'm not missing the point. I ride a 5 valve per cylinder motorcycle with
a 12,500 RPM red line to work every day. Once practical limits on BMEP
are reached the only easy way to improve HP is with more combustion
events. That is we need higher RPMS. Lighter rotors would be a boon to
be sure, but it is difficult to find ancillary parts for 7500 RPM
rotaries, and I can't come close to affording the reduction drive from a
PT-6. What your talking about makes total sense, if you are going to
replace the engine in a turbo prop. I like the intellectual exercise and
agree with your conclusions. When I mention focus I'm talking about
finding a way to get some new factory P-port castings, ready to install
for a reasonable price. The aluminum side plates would put us in another
whole league vs conventional aircraft engines. A truly bullet proof PSRU
with capability for a CS prop for reasonable money is also on my wish
list. Mistral's is great, but the last time I checked they were about 8K
and that was before the dollar drop I shudder to think right now. I want
more rotaries as much as any one. I want to use the 20B sitting in my
shop right now while I still can.
Bill
This is strictly for car racing as it makes no sense in an aircraft engine.
There are no displacement limits on aircraft engine except for Reno racing.
Toyota spent 800 Million dollars... yes 800 MILLION!!!!! last year on the Formula 1 team.
God know how much of that was spent on their uncompetitive engine.
Some of that money could and should be diverted to turbo compound rotary engine
development.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.