Subject: 13B Nomenclature
From: Rotary Engine
Date: 6/20/2008, 10:46 AM
To: AAA Put this in the To box


   Question from a newbie---
        On a Mazda Rotary engine, what do the terms "13B Street Ported Side
   Plates" and "Fc3s" refer to?

   Paul Vermillion
   Don Vermillion
   (partially completed BD-4)


   Street ported means it has been souped up by streamlining the intake
   ports.
   There are a wide range of street ports so it is hard to predict what
   the power would be. I would keep it down to below 150 HP if it is
   a pre 89 engine for reasons stated in the last message.

   You got me there on the Fc3s.

   --
   Paul Lamar ...No rotor no motor.

SA and FB are first generation body styles. FC are second gen and FD are
third gen body styles.(twin turbo). These appear in the VIN number. The
FC3s I have no idea. The first two had single turbos as options.

The FD is only twin turbo.


The street port adds a bit of power at the expense of low speed
driveability. The closing line is ground up on the iron, replicating a
later closing point in a piston engine. Idle is still good. Economy
about the same off of full throttle and so on. Does not affect side seals.


Lynn E. Hanover




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.