TO THE GROUP:
I need ya'lls help in attempting to identify a 13B rotary engine
that was previously converted to propane by Rotary International
Enterprises
(?) so that I will know what year/range of years of parts to order to
reconvert it to mogas/avgas. As you are aware, some parts will fit one
group of years but not other years. I'd GREATLY APPRECIATE
A-N-Y help
anyone can shed on my mystery 13B! (Besides converting it to
propane, they
remoted the oil filter and replaced the 13B coils with a Universal
coil.)
Thanks guys! {:>)
Paul Vermillion
Don Vermillion
(partially completed Bd-4)
As far as I know it is just the carburetor. Nothing about the basic
engine
needs changing. Is that those propane engines that were sold in Canada?
I think I have some stuff on those from years ago.
The engine is tuned for very low RPM. IMHO you need to cut those
intake runners
down to about 25 to 28 inches long and put a 180 HP Ellison aircraft
carb on there.
--
Paul Lamar ...No rotor no motor.
It appears well thought out, with a nice smooth intake, although a bit
long.
The front cover is from a 12A 74-75. With a mechanical OMP. The center
iron has the motor mount holes of a later engine. May be more than one
year involved. Once you have it apart, "O" rings in the rotor housings
vice "O" rings in the irons will pin it down. On propane it could be in
very good condition.
Lynn E. Hanover
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.