TO THE GROUP:
I need ya'lls help in attempting to identify a 13B rotary engine
that was previously converted to propane by Rotary International Enterprises
(?) so that I will know what year/range of years of parts to order to
reconvert it to mogas/avgas. As you are aware, some parts will fit one
group of years but not other years. I'd GREATLY APPRECIATE A-N-Y help
anyone can shed on my mystery 13B! (Besides converting it to propane, they
remoted the oil filter and replaced the 13B coils with a Universal coil.)
Thanks guys! {:>)
Paul Vermillion
Don Vermillion
(partially completed Bd-4)
As far as I know it is just the carburetor. Nothing about the basic engine
needs changing. Is that those propane engines that were sold in Canada?
I think I have some stuff on those from years ago.
The engine is tuned for very low RPM. IMHO you need to cut those intake
runners
down to about 25 to 28 inches long and put a 180 HP Ellison aircraft
carb on there.
--
Paul Lamar ...No rotor no motor.
Since it is an old mechanical metering oil pump, it will be a 1974 through
1976. If you will remove the intake manifold you get it closer. The center
housing and taller intake ports than the end housings. 74 and 75 all four
ports will be the same.
Bob Mears
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.