TO THE GROUP:
I need ya'lls help in attempting to identify a 13B rotary engine
that was previously converted to propane by Rotary International Enterprises
(?) so that I will know what year/range of years of parts to order to
reconvert it to mogas/avgas. As you are aware, some parts will fit one
group of years but not other years. I'd GREATLY APPRECIATE A-N-Y help
anyone can shed on my mystery 13B! (Besides converting it to propane, they
remoted the oil filter and replaced the 13B coils with a Universal coil.)
Thanks guys! {:>)
Paul Vermillion
Don Vermillion
(partially completed Bd-4)
As far as I know it is just the carburetor. Nothing about the basic engine
needs changing. Is that those propane engines that were sold in Canada?
I think I have some stuff on those from years ago.
The engine is tuned for very low RPM. IMHO you need to cut those intake
runners down to about 25 to 28 inches long and put a 180 HP Ellison
aircraft carb on there.
--
Paul Lamar ...No rotor no motor.
They may have. This was purchased from a company in New Jersey that was
selling them in groups of 5 at a time. The only ID on the engine was a
metal tag/name plate from RIE that was involved in a selloff of rotary
assets back about 1989.
Paul Vermillion
That could be a different company. Sounds like it is pre 1989 so there are
some differences.
The rotor and stationary gears were hardened and the rotor itself was
hardened
around the apex seal slot. I think it will be OK if you don't try to get
a lot of power out of it. Stock NA was about 150 HP so if you keep it below
that at 6500 RPM you should be OK for at least 1000 hours but this is an educated
guess at best. Not alot of pre 89 engines flying. I would not take it
apart if the compression is OK and fly it like it is.
--
Paul Lamar ...No rotor no motor.
Paul--
Sorry. I meant to say 1998 NOT 1989. As I understand it, the
company was branching out into refrigeration and maritime applications.
Paul Vermillion
The core engine is much better if it is a 1998 or later.
According to comments from others they selected parts from
earlier engines. Lets hope that is not the case for the core
engine.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.