Today I flew from San Diego to Brownville Texas to
attend a formation
flying clinic. After 6 hours of WOT flight I was
descending through
5000' (down from 15.5k) an just a few miles from the
airport when I had
a sudden and sickening drop in manifold pressure.
The engine was still
running fine, and I had plenty of altitude to make
the runway, so I
continued on debating weather or not to flip the
turbo oil shutoff
switch. I had grown to respect this turbo so much
that I finally
decided that I had just blown out a fitting
somewhere in the intake
system downstream of the turbo. I even continued on
to a low pass for
show rather than just landing. When I eventually
had time to take off
the cowl I was disappointed to find that all the
fitting were in place
and that the compressor wheel turns only with
significant resistance.
So the turbo is dead, and I am out of the formation
clinic and will have
to decide tomorrow about flying home with a dead
turbo. Will maybe be
able to take a look in the hot side and see what I
see.
This turbo was the TO4 hybrid with a fixed wide open
waste gate. It had
130 hrs of mostly hard duty. Sigh.
--
David Leonard
Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net
Sorry to hear that Dave. You are our main turbo
development man.
Let me review the configuration. Larger TO4
compressor wheel adapted to stock
late 2nd gen turbo. Is that correct? Was the stock
turbine trimmed?
Is this the one with the enlarged exducer?
Turbo life is now up from two hours to 130 hours to
look at the positive side.
IMHO We still need a turbo tach.
Paul Lamar ...No rotor no motor.
paul,
have you heard of these:
http://blog.autospeed.com/2007/09/28/turbo-tech-developments/
http://www.vdo.com/products_solutions/special-oem-solutions/sensors/turbo-speed-sensor/turbo-speed-sensor.htm
apparently they are being used for some of the new
variable turbos, i don't know which ones though.
gary from midland
--------------------------------------------------
Thanks Gary. Just in time. Great info. Exactly what we need.
I used to live in Midland back in the late 60's.
OK Dave here it is.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.