Hey Paul and Group, I'm rebuilding my 2004 Renesis 6 port turned P-
Port, and I can't
find these 2 type of seals in the rebuild manual, nor can I remember taking them out.
Please identify them and tell me where they go.

Thanks for your help...
Rick in Alaska

I suspect they came from the RX8 oil pan plastic baffle mounted in the oil pan.
Does that ring a bell? Any part numbers molded on them?

If they are and if you have Jerry's oil pan you won't need them.

Paul Lamar ...No rotor no motor.

Hi Paul, No numbers, but that does make sense why i don't remember them.

The oil pick up and rest of that garbage went into the trash. Yes I
have Jerry's oil pan, picked it up in the mail today. They really
had me wondering...they fit into the dowel pin holes so nice! I thought
I had just missed them on disassembly.

Once again thanks for your help...
Rick in Alaska


Hi Rick

They look like the seals for the injectors.
The larger ones for the Primaries in the centre housing and the smaller
ones being the secondaries in the intake manifold.

Steve Izett
4 Port Renesis
Perth Western Australia

I think Steve is right Rick. Do you have a low power 4 port RX8 engine?
The large one is called an insulator. Part number 13-257.