Paul, A few wks ago someone asked about the rotary in a 2 place BD 5.
Who is the kit manuf of the 2 place? Was it someone in UK? Can't seem
to find that web site. Thanks, Dave D
Here is the old message Dave.
One of the principles is on the list.
Sébastien
<sebastien.lefebvre@lhaviation.com>
What kind of engine do you have in there Sébastien?
Paul
-----------------------------
Any rotary powered BD-5s under construction or flying?
Jim Rudholm
Here is a similar all composite BD5 (2 seats) made by the French. Would love
to put a rotary engine in this one. But can not afford it. I think the
asking price with engine is 100 000 Euros, not sure.
Marc J.
http://www.lhaviation.com/site_frame/bases_marges/index.htm
http://fr.youtube.com/watch?v=UpmvstZuolA
Hello !
Directly copied from the site's english brochure :
"Concerning the propulsion, LH Aviation proposes the Rotax 912 ULS. It develops 100hp
and it is cooled by liquid and air. Other alternative engine is under consideration such as gas
turbine, turboprop and engines between 80 hp to 165hp."
Why not a rotary ?
Nevertheless, changing the engine means adapting the propeller shaft, and one must be very
cautious about vibrations and vibration induced problems ( the tail control surfaces are not very far !!!)
Philippe Dejean
The rotary vibrates less than a 912.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.