Subject: 2 place BD 5 kit?
From: Rotary Engine
Date: 6/26/2008, 7:26 PM
To: AAA Put this in the To box


The problem for a two rotor driving a remote shaft is the same as
discovered by Jim Bede years ago. That is
torsional harmonics in the shafting system and the engine. At the time
it was a 2 cylinder 2 cycle engine with two power strokes per
revolution. Just like a rotary. Eventually overcome, but daunting at
first. Pulleys overheated. Brackets broke. Crankshafts broke, and so-on.
Super soft mountings became the rule. But that allows lots of movement.
The shaft acts like a bell, and happy at a number of frequencies. One of
the engineers wrote an explanation on it, but I cannot find it at the
moment.

Another fix is a big heavy flywheel, but that cure was never used.

Lynn E. Hanover

Lynn,
There has been an Australian Invention which is major improvements in
universal joints, which would suite a application such as a long prop shaft,
it eliminates all vibrations and misalignments from memory - just can't
remember the name of it.
George ( down under)



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.