paul,
Have you ever seen the write up of the 4 rotor engine
built by granny's speed shop from two 13b engines. it
was just a one off, they don't sell it, but apparently
it worked flawlessly. he includes some details of how
he made it but has never finished all the sections.
I find it really interesting to see what you can do
with some ingenuity and machine shop time. maybe the
turbo compound rotary will eventually be built the
same way.
http://members.tripod.com/~grannys/4rotor.html
http://members.tripod.com/~grannys/4rotorcoupling.html
gary from midland
Yes I have seen it but I am a bit skeptical on the shaft
coupling. The front shaft of a 13B is reduced down.
The Corvette 4 rotor was similar but it took power out
between the engines.
--
Paul Lamar ...No rotor no motor.
I spoke with him on the phone. Very nice guy. Seemed very willing to
help out if you were serious about doing one (i.e. have all the parts
and ready to go). What is really interesting about the engine is he set
it up in a "big bang" setup which was very effective for him in terms of
engine response. He was underpowered against his comp but his engine
just acceled faster. The same people who make hayabusa v8s (powertec) in
england also offer big bang hayabusa engine for grass racing buggys that
are much faster than their normal hayabusa powered racers. Same deal
with F1 motorcycles with two stroke engines. I was planning on using a 4
lobbed coupler shaft (stoffel spline) on the thing I was planning so I
could try out both configs to see which would work better in the long run.
Rob Woods
The coupler is not the problem. The front of the 13B and RX8 e-shaft
on the back engine is the problem.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.