paul,
Have you ever seen the write up of the 4 rotor engine
built by granny's speed shop from two 13b engines. it
was just a one off, they don't sell it, but apparently
it worked flawlessly. he includes some details of how
he made it but has never finished all the sections.
I find it really interesting to see what you can do
with some ingenuity and machine shop time. maybe the
turbo compound rotary will eventually be built the
same way.
http://members.tripod.com/~grannys/4rotor.html
http://members.tripod.com/~grannys/4rotorcoupling.html
gary from midland
Yes I have seen it but I am a bit skeptical on the shaft
coupling. The front shaft of a 13B is reduced down.
The Corvette 4 rotor was similar but it took power out
between the engines.
--
Paul Lamar ...No rotor no motor.
Paul,
This is a bit off topic but addresses another ongoing thread.
Does anyone know if the Rotary Corvette's proposed exhaust system ever went
through exhaustive (pun intended) testing and whether it held up? It looks to
be a pretty straight forward join of two pipes into a union and then into the
muffler. I can't make out whether the collector pipes entered the muffler
tangentially or at right angles. Does anyone have drawings / details on internal
architecture or materials used in the pipe and muffler construction?
Thanks,
Jack Hilditch
I have no idea. I am sure all the guys that built this are retired or dead :)
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.