Subject: 2 place BD 5 kit?
From: Rotary Engine
Date: 6/27/2008, 2:01 PM
To: AAA Put this in the To box


 > Paul,   A few wks ago someone asked about the rotary
 > in a 2 place BD 5.
 > Who is the kit manuf of the 2 place?  Was it someone in
 > UK?  Can't seem
 > to find that web site.   Thanks,  Dave D
 >
 >
 > Here is the old message Dave.
 >
 > One of the principles is on the list.
 >
 > Sébastien  <sebastien.lefebvre@lhaviation.com>
 >
 > What kind of engine do you have in there Sébastien?
 >
 > Paul
 >
 > -----------------------------
 >  > Any rotary powered BD-5s under construction or flying?
 >  >
 >  > Jim Rudholm
 >
 >
 > Here is a similar all composite BD5 (2 seats) made by the
 > French.  Would love
 > to put a rotary engine in this one.  But can not afford
 > it.  I think the
 > asking price with engine is 100 000 Euros, not sure.
 >
 > Marc J.
 > http://www.lhaviation.com/site_frame/bases_marges/index.htm
 >
 > http://fr.youtube.com/watch?v=UpmvstZuolA

Hi Dave D, Sébastien and Paul

Here an English distributor web site
http://www.aerosportuk.com/acatalog/LH-10.html
The plane is from France.

Marc Joseph

I talked to Jim Bede maybe two years ago about something my buddy and I
could race.  He has some drawings for a Super BD-5, and it's a two seater.
Actually, it's what the BD-5 should have been.  We were thinking about using
one of the LS Chevys but it didn't have enough prop clearance for the
propeller we would need.  It would be great for a 200 to 250 horsepower fun
plane, but it isn't going to run down the Nemesis NXT.  I'm just guessing,
but about 400 horsepower in that airplane would make you competitive with
enough propeller, but because of the restriction in diameter, you would
probably need 600 and a propeller that looked like a prop-fan.

Steve Brazil

If you are talking Reno you are pulling at least 2G's or more in the corners
therefor induced drag is at least 4 times higher than in a straight
line. C sub L squared over pi times the aspect ratio. What you want
is a long wing with tip sails. That is why Klaus was able to go so
fast on so little HP. It is also why it is a HP course more than
form drag course.
--
Paul Lamar ...No rotor no motor.


I generally agree Paul - long skinny wings are more efficient.  The
one thing I'll point out is that the Induced drag drops dramatically
with increasing speed.  At race speeds, multiplying the induced drag
times four still makes it a small portion of the total drag (which is
dominated by "form" parasitic drag)..  Reducing wingspan to a point
(depending on the foil and other things) can drop the parasitic drag
more than it raises the induced drag.

http://en.wikipedia.org/wiki/Lift-induced_drag

This plot shows what I'm talking about:

http://en.wikipedia.org/wiki/Image:Drag.jpg

I realize that adding g's moves the effective drag bucket higher -
just like adding weight moves a sailplane's best L/D to a faster speed
with a small loss in overall L/D..


Matt-


Also why the Questair went so well and why the Nemisis NXT and Jon Sharp's Form
1 racer went so well. All airplanes with rather high aspect ratios.

You have to run the actual numbers in a spread sheet along with the wing
loading of current racers.

In addition the trim drag  to lift ratio is lower
in a Canard. Cessna increase the horz. stab. span of certain late model airplanes
to decrease the trim drag due to downforce on the tail. Airplanes
are faster with aft limit CG's.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.