>
> Paul, A few wks ago someone asked about the rotary
> in a 2 place BD 5.
> Who is the kit manuf of the 2 place? Was it someone in
> UK? Can't seem
> to find that web site. Thanks, Dave D
>
>
> Here is the old message Dave.
>
> One of the principles is on the list.
>
> Sébastien
<sebastien.lefebvre@lhaviation.com>
>
> What kind of engine do you have in there Sébastien?
>
> Paul
>
> -----------------------------
> > Any rotary powered BD-5s under construction or flying?
> >
> > Jim Rudholm
>
>
> Here is a similar all composite BD5 (2 seats) made by the
> French. Would love
> to put a rotary engine in this one. But can not afford
> it. I think the
> asking price with engine is 100 000 Euros, not sure.
>
> Marc J.
>
http://www.lhaviation.com/site_frame/bases_marges/index.htm
>
>
http://fr.youtube.com/watch?v=UpmvstZuolA
Hi Dave D, Sébastien and Paul
Here an English distributor web site
http://www.aerosportuk.com/acatalog/LH-10.html
The plane is from France.
Marc Joseph
I talked to Jim Bede maybe two years ago about something my buddy and I
could race. He has some drawings for a Super BD-5, and it's a two seater.
Actually, it's what the BD-5 should have been. We were thinking about using
one of the LS Chevys but it didn't have enough prop clearance for the
propeller we would need. It would be great for a 200 to 250 horsepower fun
plane, but it isn't going to run down the Nemesis NXT. I'm just guessing,
but about 400 horsepower in that airplane would make you competitive with
enough propeller, but because of the restriction in diameter, you would
probably need 600 and a propeller that looked like a prop-fan.
Steve Brazil
If you are talking Reno you are pulling at least 2G's or more in the corners
therefor induced drag is at least 4 times higher than in a straight
line. C sub L squared over pi times the aspect ratio. What you want
is a long wing with tip sails. That is why Klaus was able to go so
fast on so little HP. It is also why it is a HP course more than
form drag course.
--
Paul Lamar ...No rotor no motor.
This thing has a 25 foot, 6 inch wingspan with 74 sq. ft. wing area. I
think it would do well around the course. The problem we had was figuring
out the propulsion. It has a hard time using a propeller larger than 60
inches diameter. The drawing I have of it shows a Continental IO-360, I
think. Even with this engine I think it would need a five-blade prop at 60
inches diameter. Somebody should build one with that engine--it looks like
it would be a ball to fly. Maybe a three rotor would work if you could find
someone to build a seven blade propeller.
Steve
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.