Hi Paul,

I notice that almost all cars have the motor mounts set in at an
angle.  It would be simpler if I can build the motor mounts for my
Alpine (car) similar to the way Jerry builds the aircraft mounts with a
Lord mount at each end sitting vertically.  They would be much closer
to the engine though, maybe 1" away.  The engine will be supported by a
bracket that attaches to the front cover similar to the way I did the
rear mount in the BD-4, but also pick up the front four bolts on the
pan.  I assume the auto industry does that for a reason, so the
question is, if I build it as I've described, what sorts of problems
will come of it?

Bob W.