Subject: 2 place BD 5 kit?
From: Rotary Engine
Date: 7/8/2008, 6:10 PM
To: AAA Put this in the To box


Paul,   A few wks ago someone asked about the rotary in a 2
place BD 5.
Who is the kit manuf of the 2 place?  Was it someone in UK?
 Can't seem
to find that web site.   Thanks,  Dave D


Here is the old message Dave.

One of the principles is on the list.

Sébastien  <sebastien.lefebvre@lhaviation.com>

What kind of engine do you have in there Sébastien?

Paul

-----------------------------
> Any rotary powered BD-5s under construction or flying?
>
> Jim Rudholm


Here is a similar all composite BD5 (2 seats) made by the
French.  Would love
to put a rotary engine in this one.  But can not afford it.
 I think the
asking price with engine is 100 000 Euros, not sure.

Marc J.
http://www.lhaviation.com/site_frame/bases_marges/index.htm

http://fr.youtube.com/watch?v=UpmvstZuolA


Hello !

Directly copied from the site's english brochure :

"Concerning the propulsion, LH Aviation proposes the
Rotax 912 ULS. It develops 100hp
and it is cooled by liquid and air. Other alternative
engine is under consideration such as gas
turbine, turboprop and engines between 80 hp to
165hp."

Why not a rotary ?

Nevertheless, changing the engine means adapting the
propeller shaft, and one must be very
cautious about vibrations and vibration induced problems (
the tail control surfaces are not very far !!!)

Philippe Dejean


The rotary vibrates less than a 912.

-- 
Paul Lamar ...No rotor no motor.

Back in the '70's Bede introduced plans to sell a four place version of
the BD5 called the BD7. After a $400.00 deposit (not placed in escrow
as was the BD1 (later American "Yankee")) his people tried to get full
payment for all seven kits. I said I would pay for kits when they were
ready. I received a "mailagram" (I was overseas at the time) that the
plane had flown exceedingly well and the first four kits were ready.
I sent the required $1699.00. After months and months of letters back
and forth, and getting AOPA involved, I never received a nut or bolt.
After  returning back to the states I stopped at his hangar in Newton,
Kansas and a former worker told me the plane had only crow hopped on a
high speed taxi test (never flew) and truck loads of parts were sent
back to sub-contractors for lack of payment.  Karibian


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.