One of the first things to do is simulate the signal from a
crank angle sensor. The 555 requires a negative narrow
pulse to trigger it. Most low cost signal generators put out
square waves or sine waves. One needs to convert the square wave
to a negative going narrow 12 Volt pulse. This simple circuit will do
the trick. It works from 1000 RPM to 11,000 RPM.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.