Doug,
I have been rereading your e-mail from 7/17/2008 and can't quite get to
grips with your figures.
Are you saying that 18 lbs/hr ( 3 gal/m)  / 10.5 = 189cc/min, /5 =
37.8hp is for cruise or 37.8 x 4 = 151.2hp is for cruise.
So the 18 lbs/hr is for each injector?
Is cruise 6,000 rpm
If that is correct than 151.2 hp for cruise at 6,000 rpm is 200hp at
8,000 rpm for WOT . Or are you at about 180 hp at 7,200 or 190hp at 7,500.
I just can't seem to get to grips with this.
George ( down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.