Paul,
I have supplied an attachment, which I have developed for my own use,
it's not perfect as there are variations in different motors, however I
was wondering if it was of any benefit for others.
George (down under)

George,

Good on ya mate. I was just considering doing something similar in EXCEL
but visually your graph is easier to comprehend.  I assume P-ports here
and 6,000 rpms.  For every rpm you need another graph.

Cheers

Doug

Thanks Doug,
See any major errors - mind you it's rounded to the nearest 10 deg and
designed to orientate visually. I should have done this years ago.
Anyhow it's work in progress and here's an update, mind you it does look
better in Autocad.
Yes, I'm concentrating on 6,000 rpm but the events are the same but as you
say the speed is different for injection and spark. Mind you I don't know
what the timing for spark is for 6,000 rpm so I put in the static timing
marks - again just for orientation.
If you can follow this for cruise 6,000 rpm you can work out other RPM.
It would look better as a continuous line but the numbers diminish in size -
this way I get most of it on one page.
I also did it for 2 rotors, just to visually see what was happening
simultaneously.
George (down under)

Doug,
What would go well with this, is your EXCEL spread sheet in, with the
different RPM.
George (down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.