The idea here is to pick up this .75 inch diameter steel tube as
all the vertical nose gear loads go through this tube into
the fuse. Cut away Jerry's brackets in the area shown
and put the 3/4 inch hole in each bracket. The tube may need
to be made over slightly longer.
Some air planes have flanges and some don't. It therefore looks
like you can cut the flanges away and bolt Jerry's brackets on with a bunch
of 8-32 screws and lock nuts both to what is left of the channel and the firewall.
It won't hurt to back up the back of the firewall with a narrow strip of 1/8th inch thick
aluminum to act as washers.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.