Here is a great comparison example from Great Plains
http://www.greatplainsas.com/screddr.html
All these engines have the same displacement
but the geared engines can rev higher and make more
HP.
"On a 2180cc engine with a 1.6:1 drive and a 72 inch prop, you will see about
350 lbs. of thrust. On a 2.0:1 drive and an 84 inch prop will pull about 450
lbs. of thrust. You get the idea! (A direct drive VW with a 62 inch prop will
pull about 215 lbs. of thrust.)"
"Engine Size: Type 1 - 4 Cylinder, 1600-2276cc
Compression Ratio: 7.0 to 1 to 7.5 to 1
Flywheel Weight: 6 lbs.
Crankshaft Bolt: Deep drilled- Stock VW - 20mm x 1.5 X 50mm
Engine Speed: 3600 to 4200 RPM @ Take Off
Prop Used:
1.6:1 - Best is 2 blade, 72 inch
2.0:1 - Best is 2 blade, 84 inch"
Static thrust is not everything but it is needed for take off and climb
out. HP is what really counts and you are not going to be able
to rev a rotary with a direct drive prop.
My guess on a 2180cc VW engine HP is 60 HP at 3600 RPM and 70 HP at 4200 RPM.
Great Plains does not specify RPM. Stock VW engines tend to be breathing
limited preventing them from revving much higher than about 4500 to 5000
RPM.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.