Subject: Rotary engines / mailing list
From: Rotary Engine
Date: 8/4/2008, 3:08 PM
To: AAA Put this in the To box


Paul,

It appears to be working now. This is what I originally wrote to ask
you when my emails were bouncing:


While researching turbo-compounding, I came across pictures of your
traction drive on your site, and was wondering if you
had made any progress on it since the date on the pictures (5-22-06). Does it
work?

Also, I can find very little information about traction drives in
general, but I'm interested in reducing a 100,000 to 150,000 rpm
turbine down to manageable speeds for use on a conventional
reciprocating engine or rotary.  It looks a little like a planetary
differential without gears. Is it a continuously variable
transmission? Can you describe its operation? Would you share the
Solidworks files or drawings used to make it?

I'm fascinated by your description of the possible efficiencies in
turbo-compounding a rotary engine, and I'm very excited about the
implications of Mazda's new 1.6L all-aluminum direct-injection rotary
in homebuilt use.

Thanks,
-Chris

Traction drives do work. They have been widely used for years.
Doug on here has a Rotrex supercharger that uses a traction drive.
Paxton/McCulloch made truck super chargers starting in the late 1930's.

Yes I can send you some step files which work the best in Solid Works.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.