Paul,
While researching turbo-compounding, I came across pictures of your
traction drive on your site, and was wondering if you
had made any progress on it since the date on the pictures (5-22-06).
Does
it
work?
Also, I can find very little information about traction drives in
general, but I'm interested in reducing a 100,000 to 150,000 rpm
turbine down to manageable speeds for use on a conventional
reciprocating engine or rotary. It looks a little like a planetary
differential without gears. Is it a continuously variable
transmission? Can you describe its operation? Would you share the
Solidworks files or drawings used to make it?
I'm fascinated by your description of the possible efficiencies in
turbo-compounding a rotary engine, and I'm very excited about the
implications of Mazda's new 1.6L all-aluminum direct-injection rotary
in homebuilt use.
Thanks,
-Chris
Traction drives do work. They have been widely used for years.
Doug on here has a Rotrex supercharger that uses a traction drive.
Paxton/McCulloch made truck super chargers starting in the late 1930's.
Yes I can send you some step files which work the best in Solid Works.
Paul Lamar
Paul,
That's fascinating. Seems like a very reasonable way to develop high
reduction ratios with shafts of otherwise unreasonably high speeds.
I have a million questions:
What exactly is meant by "high contact surface pressure", ie how does
one calculate the roller preload necessary for it to work? Does wear
substantially decrease the interference fit (or preload) over time?
What type/viscosity of oil is used? Is the ideal roller surface finish
very smooth?
Step files would be much appreciated.
Thanks,
-Chris
You need the torque out of the turbine. You can work backwards by
estimating
the torque knowing the HP and the RPM of the turbine.
My guess on a full chat 200 HP rotary would be 50 HP out of the turbine.
HP eqauls torque times RPM divided by 5252.
My wild ass guess is about 1 foot pound at 100,000 RPM.
Then you need the coef. of friction for steel on steel in the presence
of traction fluid. There are several auto tranny traction drives on the
market
for cars so that is a good source of traction fluid. My guess on the
subject
is .3 coef. Next you know the geometery and you know the contact pressure
you can calculate the torque capacity. FEA will give you the contact
pressure
of a steel ring deflected into a triangular shape with three internal
rollers.
Here is a pdf on traction fluid.
You insert the ring in a large lathe 3 jaw chuck and insert the rollers
and
release the chuck.
Doug may have done static torque measurements on the Rotrex.
I basically copied the Rotrex.
Paul Lamar
That should be no trouble for me to assess and tweak. I've been
second-guessing the simplicity of the drive -- it really is
straightforward.
Do Nissan/Audi/etc CVTs use a traction fluid? Figuring accurately for
coefficient of friction and whether or not to consider it linear
(constant with increasing contact pressure), and how critical roller
finish is are really the only issues I'm uncertain about. If .3 is
what you guess it to be, that gives me a good place to start.
Thanks,
-Chris
Yes they do Chris. It should be easy to find out what brand it is as
that info is probably in the owner's manuals. I suspect the finish should be
mirror quality.
BTW There is a golden opportunity out there to get a huge grant from
the DOE to study the rotary turbo compound. Now is the time to do that.
On the other hand we have had over 5000 hits on our youtube P-port
RX8 engine and only about 2500 total for all three of our turbo compound
videos. Obviously the youtube audiences is more interested in more RX8 power
than they are in better RX8 MPG I am sad to say.
Paul Lamar
You think the DOE cares about rotaries? I'm of the opinion that the
general public doesn't know what to make of them, and I personally
wonder how widespread they could ever be in conventional
transportation. That Mazda has stuck with them all these years is a
benefit to those of us who want high power density for special
applications.
The step to plug-in hybrid and eventually full electric vehicles quite
frankly seems much closer to reality than rotaries. What would you
like to see them used in?
-Chris
P.S. I think rotaries will never overcome the oil consumption thing
that causes higher HC emissions and certainly limits widespread
adoption compared to "PZEV" reciprocating engines.
----------------------------------------------------------------
The rotary is the only mass produced four stroke internal combustion engine
without an exhaust valve. The exhaust valve alone is probably
responsible for 20% of the total energy lost in the exhaust.
That is not the same thing as saying the efficiency of the ICE can be improved
20% by the elimination of the exhaust valve. What I am saying is eliminating the
exhaust valve increases the kinetic energy in the exhaust and making more
available for a turbine.
Since over half the energy in a gallon of gas is lost in the exhaust
that makes the turbo compound rotary potentially the most efficient
ICE of all with the possible exception of the turbo compound diesel.
The exhaust valve is the Achilles heel of the turbo compound gasoline piston
engine as if and when it breaks up it takes out the turbine. The exhaust of a
diesel engine is much cooler. Thousands of CW R3350 turbo compound engines were
built in the 1940's and 1950's so there is no great leap to turbo compound
technology. It could be in use in a year or two. Turbo compound diesel engines
are already available. We have just seen the tip of the iceberg in turbo
compound diesel engines. The current sales of Detroit Diesel turbo compound DD15
engines will see to that.
Hybrids will use ICE's for the foreseeable future so one could use
a turbo compound rotary in a hybrid as well. It would have advantages in the
power to weight ratio and power to size ratio.
The Hc emissions have been largely eliminated by the RX8 engine side exhaust port.
There is no such thing as a zero emissions vehicle in the U.S. The electricity
must come from somewhere and until there is wide spread adoption of nuclear
power plants we will continue to burn oil, natural gas and coal for the vast
majority of the electricity generated in the U.S.. The emissions are just
exported to the source of the electricity. Sorry but those are the facts.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.