Paul,
I was watching the Rolex grand am cars yesterday and I was wondering why
the RX-8's weren't walking the other cars on the straights like they
always did at which point they said that the redline was reduced to
8600.
Also I sent another email requesting the center housing width for
13B/renesis engines. Did you get that?
Rob Woods
I was in OSH and the newsletter shuts down when I am not here.
They probably handicapped the Maxda RX8's again because they were
winning. Can't have rotary engines winning races all the time.
It looks like 2 inches but the one I have is about 2 thou under that.
May have been lapped. Early (some) Mazda engine dims were in inches.
Paul
Yes, we were saddled with an rpm penalty...but...low and behold we were
able to employ (gamble) a solid fuel strategy and finish a strong
second....cutting championship points lead to six with two races to
go...
New Jersey and a long one (1,000K) at Salt Lake...should be a good
shootout...
Talk with you soon-
John
John M. Doonan | Manager, Motorsports Team Development
| Mazda North American Operations
Thanks for the update John. Perhaps it is time to do some more
internal aerodynamic development. I got some ideas.
Do you have a subscription to Bernoulli magazine?
Paul Lamar
I love ideas...and no, I don't have a subscription to Bernoulli
magazine...is that the periodical where the article you wrote was
re-published/re printed?
John M. Doonan | Manager, Motorsports Team Development
| Mazda North American Operations |
Yep.
http://www.racetechmag.com/
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.