> Paul:
>
> Look what they are using for an engine.
>
> http://www.youngcopter.com
>
>
> John Gibbons
>
> Looks like a Mazda. Maybe a Mistral.
>
> Too bad they don't have an email address listed.
>
>
> Paul Lamar
"The neosis rotary-engine is supplied by a well-known car manufacturer
which mass-produces this type of engine since many decades."
Sounds like a Renesis.
Chris Wood.
--
Try bj@youngcopter.com
John Gibbons
Paul:
Well, whoever supplies the Neo engine, it will be interesting to see how
it performs, and more important, how it holds up. As you well know,
helicopter applications really put serious demands on their engines, if
the engine is marginally sized for the aircraft.
An R22 de-rates the 150 hp Lycoming to about 125hp, and most likely the
Neo will need a bit more for various reasons. A Hughes 300C has a 180hp
engine and uses every bit of it.
George Glazik
Any idea who is providing the engine for the recently announced NEO
helicopter from Germany?
George Glazik
We got a lot of George's and John's so everybody please use your full
name.
Paul Lamar
Paul,
It would appear that the NEO copter could get a boost in power by adding
turbine buckets to the periphery of the engine cooling fan and routing
exhaust gases to impact the buckets. Just a thought! Milo
-----------------------------------------------------------------------------
That is a good idea. Put that waste exhaust energy to work to drive the cooling
fan. If the buckets can emerge for the exhaust during part of each rotation
they can cool them selves.
Back in 1997 when I was still using ACAD, before I knew about Kuchemann & Weber
and Perry Mick and I still thought ducted fans were reasonable efficient I
designed an aircraft that used that principle sort of. Note: I planed on using
Steve Beckham's and Everett Hatch's Power Sport engine at that time.
BTW Paul Moller still thinks ducted fans are reasonably efficient :)
--
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.