A few things happened... I'm back with my first choice of aircraft to
build. A kit is available and more information is available for this
plane. Min HP is 150. The VNE is not established yet but someone in
England is doing his best to get this plane approuved, more to come on
this later.
http://picasaweb.google.com/trav8s/Nexus2 pictures taken at Oshkosh 08
Yesterday I used the dimensions available from Rotamax and Mistral.
Both companies will allow their engine to fit in without the chicks on
the cowl. See picture one and two. The builder of a sailplane told me
the drag reduction, without the chicks, would be significant. I love
rotary engine for their small dimension :)) and more.
Dimensions for the engine mount is: Top left to right 23 1/2, bottom
left to right 20 3/4 and top to bottom 22 3/8. Paul I could mail you
some, not to scale, drawings of the plane for a better all around
picture for a rotary installation.
Now I still need an air intake. I could do several things but two are
in my top list. See picture three Mustang P51 and picture four of this
other one sort of ram air.
Paul and group what do you think?
A while back Mistral had a price tag of 45,000 US$ for their 190HP
model. What is their current price for their 200HP?
Marc Joseph
The dwg's would help. send to:
Paul Lamar
830 East Santa Maria St.
Suite 303
Santa Paula Ca
93060
The first picture (red airplane ) looks like a single place and the
second a two place (beige airplane). Which one are you building?
I have dwg and pictures of the second one I think. At least two people
are building two place mustangs with rotaries.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.