>
> A few things happened... I'm back with my first choice of
> aircraft to
> build. A kit is available and more information is
> available for this
> plane. Min HP is 150. The VNE is not established yet
> but someone in
> England is doing his best to get this plane approuved, more to
> come on
> this later.
>
>
http://picasaweb.google.com/trav8s/Nexus2 pictures taken
> at Oshkosh 08
>
> Yesterday I used the dimensions available from Rotamax and Mistral.
> Both companies will allow their engine to fit in without the
> chicks on
> the cowl. See picture one and two. The builder of a
> sailplane told me
> the drag reduction, without the chicks, would be
> significant. I love
> rotary engine for their small dimension :)) and more.
>
> Dimensions for the engine mount is: Top left to right 23 1/2, bottom
> left to right 20 3/4 and top to bottom 22 3/8. Paul I
> could mail you
> some, not to scale, drawings of the plane for a better all around
> picture for a rotary installation.
>
> Now I still need an air intake. I could do several things
> but two are
> in my top list. See picture three Mustang P51 and picture
> four of this
> other one sort of ram air.
>
> Paul and group what do you think?
>
> A while back Mistral had a price tag of 45,000 US$ for their 190HP
> model. What is their current price for their 200HP?
>
> Marc Joseph
>
> The dwg's would help. send to:
>
>
> Paul Lamar
> 830 East Santa Maria St.
> Suite 303
> Santa Paula Ca
> 93060
>
> The first picture (red airplane ) looks like a single place and the
> second a two place (beige airplane). Which one are you building?
> I have dwg and pictures of the second one I think. At least two people
> are building two place mustangs with rotaries.
>
> Paul Lamar
Hi Paul,
The red plane is a tandem a/c (NexusMustang). This is the one that I
have the plans. The beige is just to show you the air intake (Mustang II).
I will send you the plans (not to size) at the address above.
Thanks
Marc Joseph
Well the problem with that intake scoop is it does not readily adapt to a rad
in the cowl. In fact with out the cheeks it is kind of hard to cram
the cooling system in the cowl. Since it is unwise to cut large
holes in the aft fuse skin and rearrange the flight controls I suggest
a quick and simple rad mount under the fuse aft of the wing as in
these pictures and 3D.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.