Subject: NexusMustang with rotary
From: Rotary Engine
Date: 8/15/2008, 11:48 AM
To: AAA Put this in the To box


 >    > A few things happened...  I'm back with my
 > first choice of
 >    > aircraft to
 >    > build.  A kit is available and more
 > information is
 >    > available for this
 >    > plane.  Min HP is 150.  The VNE is not
 > established yet
 >    > but someone in
 >    > England is doing his best to get this plane
 > approuved, more to
 >    > come on
 >    > this later.
 >    >
 >    > http://picasaweb.google.com/trav8s/Nexus2
 > pictures taken
 >    > at Oshkosh 08
 >    >
 >    > Yesterday I used the dimensions available from
 > Rotamax and Mistral.
 >    > Both companies will allow their engine to fit in
 > without the
 >    > chicks on
 >    > the cowl.  See picture one and two.
 > The builder of a
 >    > sailplane told me
 >    > the drag reduction, without the chicks, would be
 >    > significant.  I love
 >    > rotary engine for their small dimension :))
 > and more.
 >    >
 >    > Dimensions for the engine mount is: Top left to
 > right 23 1/2, bottom
 >    > left to right 20 3/4 and top to bottom 22
 > 3/8.  Paul I
 >    > could mail you
 >    > some, not to scale, drawings of the plane for a
 > better all around
 >    > picture for a rotary installation.
 >    >
 >    > Now I still need an air intake.  I could do
 > several things
 >    > but two are
 >    > in my top list.  See picture three Mustang
 > P51 and picture
 >    > four of this
 >    > other one sort of ram air.
 >    >
 >    > Paul and group what do you think?
 >    >
 >    > A while back Mistral had a price tag of 45,000
 > US$ for their 190HP
 >    > model.  What is their current price for
 > their 200HP?
 >    >
 >    > Marc Joseph
 >    >
 >    > The dwg's would help. send to:
 >    >
 >    >
 >    > Paul Lamar
 >    > 830 East Santa Maria St.
 >    > Suite 303
 >    > Santa Paula Ca
 >    > 93060
 >    >
 >    > The first picture (red airplane ) looks like a
 > single place and the
 >    > second a two place (beige airplane). Which one
 > are you building?
 >    > I have dwg and pictures of the second one I
 > think. At least two people
 >    > are building two place mustangs with rotaries.
 >    >
 >    > Paul Lamar
 >
 >
 > Hi Paul,
 >
 > The red plane is a tandem a/c (NexusMustang).  This is the
 > one that I
 > have the plans.  The beige is just to show you the air
 > intake (Mustang II).
 >
 > I will send you the plans (not to size) at the address above.
 >
 > Thanks
 >
 > Marc Joseph
 >
 > Well the problem with that intake scoop is it does not readily
 > adapt to a rad
 > in the cowl. In fact with out the cheeks it is kind of hard to cram
 > the cooling system in the cowl. Since it is unwise to cut large
 > holes in the aft fuse skin and rearrange the flight controls I suggest
 > a quick and simple rad mount under the fuse aft of the wing as in
 > these pictures and 3D.
 >
 > Paul Lamar


 > Marc, It could look something like this. Fill and blend in the sides
 > with foam to make it look more like a P51 scoop.
 >
 > Paul Lamar


Wow, and me, I wanted a more P51 look.  Well you have just made my day :))

Marc Joseph

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.