Paul:

This is a comment on the recent thread on Foldaplane techniques,
especially as described by Steve Rahm and as applied to the Vision aircraft.

You may not know that the subject of "folded joints" is discussed at
some length in my book "Advanced Composite Techniques" (which has
picture of a Vision on the cover) and makes particular reference to the
Vision fuselage as an example. The book contains what amounts to a
self-teaching series of "exercises" which brings the composite builder
from the simplest of open layups to a wing structure assembled from
cored sandwich panels. Among the "exercises" is an example of folded
joints which is essentially the tail cone of a Tailwind aircraft. In one
of the early "exercises", I have the reader assemble a standard US mail
box, where the flat sides and curved top have dimensions and radii
fairly typical of practical aircraft parts and are made at one pass on a
4x8 flat tool, then "folded" in a simple jig.

The family of techniques described in "Advanced" may be summarized as
being various ways of making and assembling flat or single-curved
composite sandwich panels into practical aircraft structures,
particularly where the panels have very thin skins and very thick cores.
Such panels are structurally efficient, as shown by Rutan long ago, and
benefit from the fact that skin material is expensive and heavy and core
material is cheap and light.

Rutan has us apply composite skin directly to shaped foam. After cure,
the rough surface must be filled and brought to final dimension -- a lot
of  work as the price of being "moldless." "Advanced" basically shows
how to make skins and cored panels on flat tools using vacuum bagging
techniques, then assemble these panels as needed. The panels have the
accuracy and finish of a smooth tool surface and need very little
filling. Since the panels are very stiff, they are easy to jig for
assembly, whether or not the assembly uses folded joints. This area is
somewhat off-topic, so I'll stop here.

Steve Rahm was a great help in the beginning of my book project. (I hold
Vision planset #34.)

I invite off-list communication from interested builders. If this brief
piece stirs any new interest, please note that my website,
Aeronautpress.com, was blocked by Google because of "unauthorized
access" by hackers. I am transferring my entire Internet stuff to my
local ISP, where I can talk to a human as needed and have them clean my
site. I hope that this whole mess will be cleared up in the next week
and the website restored.

Zeke Smith,    Aeronaut Press