Subject: Piezo injectors-State of the art.
From: Rotary Engine
Date: 8/25/2008, 7:14 AM
To: AAA Put this in the To box

Maybe we can use these. Apparently they are much faster so the
dynamic range is higher.

http://www.conti-online.com/generator/www/de/en/cas/cas/functions/contact/contact_en.html

http://www.autoweek.com/apps/pbcs.dll/article?AID=/20060609/FREE/60605013/1024/LatestNews

"Piezo injectors are just now coming to Europe on high-end
vehicles from Range Rover, Audi and Mercedes-Benz. Piezo is
widely seen as the next big evolution of the diesel engine.

Small crystalline discs in the injector change shape when
electricity is applied. When the discs change shape, diesel fuel
under high pressure is shot through a needle in a fine spray
into the engine's combustion chambers.

As many as seven injections can be made in a single piston
stroke, compared with one or three injections in most diesel
engines. Those multiple injections lower the temperature in the
combustion chamber, which in turn lowers oxides of nitrogen
emissions.

Piezo injectors also reduce noise, vibration and smoke, all
unpopular traits of a diesel engine."

"The piezo injectors to be used in the Super Duty pickups will
be made by a joint-venture company in Blythewood, S.C., owned by
German supplier Siemens VDO and International. Production of the
injectors is scheduled to start in December,[2007?] said Siemens
spokesman Brad Warner. He would not confirm any vehicle
applications but said the plant's entire output will go to
International."

Continental Teves, Inc.
One Continental Drive,
Auburn Hills, MI 48326, USA
Phone: +1 248 393-5300
Fax: +1 248 393-5301


Paul Lamar

--------------------------------------------------------------------------

Hi, Paul

Unlike in the US, Diesel cars represent a significant part of
the market in Europe - up to 54 % in France for the year 2007!
Some people here say that it is an economic nonsense due to fuel
prices' distortion by different tax's rates...
Others say that diesel being the best fuel efficient piston
engine, this is the most sensible policy to keep CO2 emissions
as low as possible...

However, piezo injectors, connected to Bosch microcontrollers,
are largely used on diesel cars for several years, and not only
on the expensive ones.

The most sold Renault is a 1.5 liter displacement engine
ranging from 65 to 105 HP, that powers a lot of small and medium
size cars (to European standards), including the low-cost "Dacia
Logan" built in Romania.

The commercial names are :
  PSA (Peugeot and Citroën)  : Hdi or Hdi-FAP  (high pressure
direct injection or high pressure direct injection - Filtre à
  particles (particles filter))
  Renault              : Dci
  VAG (VolksWagen...)  : Tdi (sometimes with piezo
  pump-injectors that reach pressures up to 250 MPa -36,250
  PSI)
  Ford-Europe          : Tdci ( in fact those diesel engines
  are PSA Hdi's)

GMC sell Isuzu diesel engines that includes that technology on
OPEL cars and... on the Hummer H1 (latest versions of the 300
HP+ V8 "Duramax")

The piezo injector technology enables the precise timing of 6
injections per cycle :

The first  "pre-injection" consist of injecting a very small
amount of diesel fuel to initiate the combustion without
having a too large "bubble" exploding and thus creating the peak
of pressure that make the classic standard diesel
"ticking" sound.

The second "pre injection" is the injection of another small
amount of diesel fuel to make the first hot "bubble" bigger
before it cools down.

The first main injection is meant to produce power, but it is
stopped before the oxygen of its corresponding volume is
consumed (not to produce carbon particles.)

The second main injection starts when the turbulence
in the combustion chamber brings oxygen in front of
the injector nozzle.

The two "post injections" (needed only to produce more
than 30 or 40% of the max torque at the present rev's) are very
similar to the second main injection in that they start when
turbulences have brought enough oxygen in front of the
injector nozzle, but they occur when the volume of the chamber
has significantly grown (it is a sort of re-heat effect).

When the differential pressure across the particle filter
reaches some threshold, the controller reduces the second main
injection and increases the post injections so that the exhaust
gas temperature is high enough to start the pyrolitc cleaning
of the particle filter.

Considering that the max rev's of such car diesel engines is
5000 RPM or more, that means that the 6 injections can be timed
in less than 5 milliseconds, and the the opening and closing
time of a piezo injector is smaller than 500 microsecond
(considering the dynamic response needed by the pre-injections,
this times  are probably closer to 50 microseconds).

Does that make any sense for rotary application ?

Philippe-Pierre DEJEAN

---------------------------------------------------------------

Very very interesting state of the diesel art article Philippe.
Thanks.

I am not sure it has applications to the rotary but certainly
provides a lot of options at low power low RPM for car use
of the rotary.

The low power low RPM fuel burn of the rotary must be improved
or the engine is at risk of being discontinued.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.