> Maybe we can use these. Apparently they are much faster so the
> dynamic range is higher.
>
> http://www.conti-
>
online.com/generator/www/de/en/cas/cas/functions/contact/contact_en.html
>
http://www.autoweek.com/apps/pbcs.dll/article?AID=/20060609/FREE/60605013/1024/LatestNews
>
> "Piezo injectors are just now coming to Europe on high-end
> vehicles from Range Rover, Audi and Mercedes-Benz. Piezo is
> widely seen as the next big evolution of the diesel engine.
>
> Small crystalline discs in the injector change shape when
> electricity is applied. When the discs change shape, diesel fuel
> under high pressure is shot through a needle in a fine spray
> into the engine's combustion chambers.
>
> As many as seven injections can be made in a single piston
> stroke, compared with one or three injections in most diesel
> engines. Those multiple injections lower the temperature in the
> combustion chamber, which in turn lowers oxides of nitrogen
> emissions.
>
> Piezo injectors also reduce noise, vibration and smoke, all
> unpopular traits of a diesel engine."
>
> "The piezo injectors to be used in the Super Duty pickups will
> be made by a joint-venture company in Blythewood, S.C., owned by
> German supplier Siemens VDO and International. Production of the
> injectors is scheduled to start in December,[2007?] said Siemens
> spokesman Brad Warner. He would not confirm any vehicle
> applications but said the plant's entire output will go to
> International."
>
> Continental Teves, Inc.
> One Continental Drive,
> Auburn Hills, MI 48326, USA
> Phone: +1 248 393-5300
> Fax: +1 248 393-5301
>
>
> Paul Lamar
>
> -----------------------------------------------------------------
> ---------
>
> Hi, Paul
>
> Unlike in the US, Diesel cars represent a significant part of
> the market in Europe - up to 54 % in France for the year 2007!
> Some people here say that it is an economic nonsense due to fuel
> prices' distortion by different tax's rates...
> Others say that diesel being the best fuel efficient piston
> engine, this is the most sensible policy to keep CO2 emissions
> as low as possible...
>
> However, piezo injectors, connected to Bosch microcontrollers,
> are largely used on diesel cars for several years, and not only
> on the expensive ones.
>
> The most sold Renault is a 1.5 liter displacement engine
> ranging from 65 to 105 HP, that powers a lot of small and medium
> size cars (to European standards), including the low-cost "Dacia
> Logan" built in Romania.
>
> The commercial names are :
> PSA (Peugeot and Citroën) : Hdi or Hdi-
> FAP (high pressure
> direct injection or high pressure direct injection - Filtre à
> particles (particles filter))
>
> Renault : Dci
> VAG (VolksWagen...) : Tdi (sometimes
> with piezo
> pump-injectors that reach pressures up to 250
> MPa -36,250
> PSI)
> Ford-
> Europe :
> Tdci ( in fact those diesel engines
> are PSA Hdi's)
>
> GMC sell Isuzu diesel engines that includes that technology on
> OPEL cars and... on the Hummer H1 (latest versions of the 300
> HP+ V8 "Duramax")
>
> The piezo injector technology enables the precise timing of 6
> injections per cycle :
>
> The first "pre-injection" consist of injecting a very small
> amount of diesel fuel to initiate the combustion without
> having a too large "bubble" exploding and thus creating the peak
> of pressure that make the classic standard diesel
> "ticking" sound.
>
> The second "pre injection" is the injection of another small
> amount of diesel fuel to make the first hot "bubble" bigger
> before it cools down.
>
> The first main injection is meant to produce power, but it is
> stopped before the oxygen of its corresponding volume is
> consumed (not to produce carbon particles.)
>
> The second main injection starts when the turbulence
> in the combustion chamber brings oxygen in front of
> the injector nozzle.
>
> The two "post injections" (needed only to produce more
> than 30 or 40% of the max torque at the present rev's) are very
> similar to the second main injection in that they start when
> turbulences have brought enough oxygen in front of the
> injector nozzle, but they occur when the volume of the chamber
> has significantly grown (it is a sort of re-heat effect).
>
> When the differential pressure across the particle filter
> reaches some threshold, the controller reduces the second main
> injection and increases the post injections so that the exhaust
> gas temperature is high enough to start the pyrolitc cleaning
> of the particle filter.
>
> Considering that the max rev's of such car diesel engines is
> 5000 RPM or more, that means that the 6 injections can be timed
> in less than 5 milliseconds, and the the opening and closing
> time of a piezo injector is smaller than 500 microsecond
> (considering the dynamic response needed by the pre-injections,
> this times are probably closer to 50 microseconds).
>
> Does that make any sense for rotary application ?
>
> Philippe-Pierre DEJEAN
>
> ---------------------------------------------------------------
>
> Very very interesting state of the diesel art article Philippe.
> Thanks.
>
> I am not sure it has applications to the rotary but certainly
> provides a lot of options at low power low RPM for car use
> of the rotary.
>
> The low power low RPM fuel burn of the rotary must be improved
> or the engine is at risk of being discontinued.
>
> Paul Lamar
> --
> The Rotary Engine NewsLetter. Powered by Linux.
> ACRE NL web site. http://www.rotaryeng.net
> Youtube key word UTUBPLEASE
> Copyright 1998-2008 All world wide rights reserved.
>
Hi Paul and group,
VW, one or two years ago, had to remove from the Canadian market their
TDI engines. The reason is the quality of the diesel here is lower then
the Europeen market.
I will check with the local dealers if the situation has improved in
Canada. Back to you soon.
Marc Joseph
VW now has the next gen TDI available in the US. Much of the 2009 MY
allotment has been spoken for, so don't look for anything below MSRP.
Honda, Subaru, and Nissan are to follow. PSA (Peugeot and Citroën) has
started buying Ford's all new, all aluminum next gen diesel's for their
own cars - the 1.4 & 1.6L "Duratorq". Ford is selling these in their
new Fiesta in the rest of the world. It gets 63.5 mpg combined and about
72 mpg highway. Europe is going to EURO5/6 emission standards starting
in January. This is harder than TIER2 BIN5 - our current requirements.
Why they don't sell them here is beyond me.
In our rotary, would this help to produce something like the John Deere
SCORE rotary that could burn any liquid fuel with spark ignition ?
-dave
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.