> Paul,
>
> Most of the piezo injectors I have found to date are quite fat in
> diameter. The RX-8 and DEKA IV pencil injectors are
> only 15mm in
> diameter and although electro-magnetic they are quite fast and
> flow a
> lot with good spray pattern. These are the best rotary aircraft engine
> option out there for the near term as far as I can tell. Piezo
> technology sounds sexy but unless we are injecting in the combustion
> chamber (like diesel engines) they just aren't needed.
>
> Doug in Japan
Doug that what I was thinking. Not good for the rotary engine but. If
it vaporise fuel well enough then perhaps. Built a rotor with small
rounded combustion chambers (3 or 4) instead of the large rectangular.
Just remove one plug to replace it by the piezo injector. This way you
save the fuel lost on the walls of the air/fuel induction system.
Just my two cents.
Marc Joseph
>
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.