Subject: R.A.C.E. Rotary Atkinson Cycle Engine (Independent of type of fuel used
From: Rotary Engine
Date: 8/29/2008, 5:55 PM
To: AAA Put this in the To box

http://white-smoke.wetpaint.com/page/Rotary+Engine?t=anon


"4.1 Why Rotary?
The conventional internal combustion engine has been with us for over 100 years. During this time it has altered very little. Mechanically, it still converts oscillatory motion into rotary motion, which is intrinsically inefficient. Attempts to make this design more efficient usually entail adding extra components and complexity, e.g. turbo charging, supercharging etc. As a general concept, if what you want is rotary motion then why not start with rotary motion. Our philosophy is to keep things simple, no crankshafts, connection rods, pistons, cams and multiple valves. Several notable designs have been put forward, but for one reason or the other, be it technical, environmental or efficiency grounds, they have not reached general popularity. The D.A.R.T. design not only overcomes all the previous problems encountered with other rotary engines but addresses the fundamental principles that make an engine more powerful, efficient, economical, and non-polluting."

Nothing new here. Felix investigated this configuration.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.