> Hi Paul and all
>
> I would appreciate some wisdom from you guys in relation to:
>
> 1. Gascolators - Are they fuel water separators? Is it advisable
to have
> one
> in the system for Western Australian conditions?
> My apologies if this is a dumb question.
>
>
> 2. Firewall barriers.
> The Glasair Super II RG came with a 0.5 inch Fiberfax sheet and
aluminum
> cover sheet. Is this current technology. I understand Fiberfax
comes with
> some health warnings when working with the stuff?
>
> Cheers
>
> Steve Izett
> Galsair Super II RG Renesis 4 port
> Perth, Western Australia
>
> 1. Yes they are fuel water separators. Required on cert airplanes
by the
> FAA here in the US I think. I know it does not rain out there very
much
> but you never know you might fly someplace where it does. Darwin
maybe.
>
> 2. Wear a face mask. I would use thin gage SS instead of aluminum for
> a firewall. The melting temp is twice as high. Take no chances with
> airborne fire. Worse thing that can happen to you by far.
>
> Paul Lamar
Steve,
I don't know what your building or planning to install but a
gascilator does
remove water from fuel. If your planning a Mazda engine I don't
think that
many people run gascilotars if their running mogas. Mogas in most
cases has
10% ethanol and any alcohol will readily mix with water and pass
through the
system without worry.
Have a look at what the local chaps are running with their rotaries
and you
won't go far wrong. Most water concerns come from contaminated fuel or
condensation of partially filled tanks sitting overnight.
There are a number of fiber insulator materials available locally. I
found
one locally by looking in the yellow pages. This stuff is used in
council
buses to isolate heat, it's a coarse woven material - great stuff but
expensive.
George (down under) Brisbane.
Thanks George
Steve Izett
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.