> Steve Thomas,
> How are you doing, the last photos I saw of yours had no cowl.
>
> Steve Izett
I'm getting very close to first engine start. Now wringing out all of
my electrical systems. Here is a photo of the cowl that I designed.
Made a male plug by packing the engine in foam and shaping. Used a
fire-resistant resin and regular glass. Just got my gear retraction
system working correctly.
Best
Regards,
Steve Thomas
I added some more file pictures of Steve's installation for a look inside.
Don't bug Mistral as I understand it they don't sell onezies twoezies
anymore. Steve was real lucky.
Paul Lamar
--
Very clean installation! I have a couple of questions:
1. How does the motor mount used by Steve Thomas compare to the Schertz
Beam design?
2. What are the three silver colored cylinders on the right
rear side of the manifold.
Finally, I can not help but comment on his great exhaust "Plumbing Job".
Joel
Well the Mistral engine front cover (car) is designed to bolt to a stock
Lycoming dynafocal mount even though a different configuration is desirable for
a rotary engine. The rotary has fewer and different vibratory modes. It is just
an expedient to get the Mistral engine adopted as soon as possible by certified
aircraft builders.
I think those are various and assorted manifold pressure sensors.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.