Subject: Fire walls and Fuel Systems
From: Rotary Engine
Date: 9/1/2008, 8:01 PM
To: AAA Put this in the To box


Very clean installation!  I have a couple of questions:

   1.  How does the motor mount used by Steve Thomas compare to the  Schertz
   Beam design?

   2.  What are the three silver colored cylinders on the right
   rear side of the manifold.

   Finally, I can not help but comment on his great exhaust  "Plumbing Job".

   Joel

Well the Mistral engine front cover (car) is designed to bolt to a  stock Lycoming dynafocal mount even though a different configuration  is desirable for a rotary engine. The rotary has fewer and different  vibratory modes. It is just an expedient to get the Mistral engine  adopted as soon as possible by certified aircraft builders.

I think those are various and assorted manifold pressure sensors.

Paul Lamar

Please also note that the Mistral engine design can also use a
Continental style mount.  I'm not real familiar with the Continental
mount, but I understand it to be a bed-type mount.  I chose to use the
dynafocal mount as it was supplied by Glasair and is integral to the
nose gear retraction mechanism.  I just didn't want to get involved
with trying to copy the nose gear configuration on a new mount. Also,
I utilized some of the Continental-mount bosses to hang my radiators.

The three cylinders you note are mass airflow sensors.  One each for
the two ignition systems and one spare.

As for the primo exhaust plumbing system, this was a mock-up for my
exhaust which has been finished for some time now.  However, given the
incident that Mistral experienced with their Arrow, my exhaust system
will probably be redesigned prior to first flight.  But what will be
done in the redesign is anyone's guess at this point.

Best Regards,

Steve Thomas

Some Continental mounts are bed mounts and some are non dynafocal mounts from
one end of the engine similar to the dynafocal. As far as I know Mistral never built a bed mount engine.  I have been going to OSH  and Switzerland since Mecan days.

Those are the strangest mass air flow sensors I  ever saw :) If they are they won't work as they are in the boundary layer of the intake manifold air flow.

I am sure Francois will jump on here and clarify. At least I hope he does.

Paul
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.