Subject: Preparing aluminum for epoxy bonding
From: Rotary Engine
Date: 9/2/2008, 10:09 AM
To: AAA Put this in the To box


    Hmm aluminum etching is a no brainer.   What the heck is a conversion
    coating?  I thought it might be a neutralizer.  Sounds like I am wrong.
    Perhaps a chemical reaction with the aluminum to create a coating onto
    which the epoxy could stick to? ?

Dupont 226S conversion coating it is an alodine. $50.00 a gallon goes on
after the $50.00 a gallon acid etching and must go on emmidiately. I
have it in gallons if you cannot find it in Japan. You will only need a
very small amount. I can put some in a small container for you.

Dan



Hi Paul,

Ok it looks like I have been misinformed. Cleaning aluminum is done with
acid.

Alodining is a chromate chemical process.

Here is a website explaining how it is done if anyone is interested.
Funny I always thought alodining was an electro-chemical process. Live
and learn.  Surely I can find these materials in here. Thanks anyway Dan.

http://www.eaa1000.av.org/technicl/corrosion/alodine.htm

Doug in Japan.

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.