Subject: low-profile oil filter adapter block
From: Rotary Engine
Date: 9/2/2008, 5:17 PM
To: AAA Put this in the To box


     > Hi all,
     > Does anyone have a design for a low-profile adapter block to attach
   to > the oil filter mount, so a remote filter can be installed? Just
   curious > to know if I am reinventing the wheel or not.
     > Thanks much,
     > John Bell

   Some body may have one of those but I don't know who. Jerry Hey could
   build it. Here are some pictures. I'll ask Al Gietzen where he got his.

   Paul Lamar


   Thanks much Paul. I could build it...I just wanted to know if anyone had
   a drawing. Always better to see if there is better out there or if I can
   offer any improvements to what folks are using. Thanks again...
   John Bell in TN

   Check with Racing Beat or Mazdatrix. I think the racers use remote
   filters.

   Paul Lamar


Yeah,
I've actually got one that Mark Wrathall made for me, but I made and am
using another one that fits into the narrow cowl of my RV-4. That says
something about how tight the cowl is.
I can get a photo of my other one in case anyone is interested in it or
building one like it. It can be made in a few hours with a drill press
and a tap. Right now it is up at the hangar.

Brian Trubee



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.