Subject: KERS - was Interesting Mechanism
From: Rotary Engine
Date: 9/3/2008, 1:16 PM
To: AAA Put this in the To box


     > > Still not sure we're on the same page. I think having a single
   ratio
     > > drive to the regen generator/motor is perfectly adequate - a
   cvt or
     > > other variable ratio drive is not necessary. The bulk of the
   energy
     > > available is going to come from slowing from a high speed. The
   regen
     > > energy available from a slow speed is negligible.
     > >
     > > Storing energy to a flywheel certainly requires a different
   approach -
     > > accelerating the flywheel while decelerating the car.
     > >
     > >
     > > Regards,
     > >
     > > Matt-
     > >
     > >
     > > Well You could be right. Maybe we don't have to change the ratio.
     > > How do you propose speeding up the flywheel as the car slows?
     > >
     > > Paul Lamar
     >
     >
     > Like I said.. The all mechanical storage system (flywheel) requires
     > something different. If weight weren't a concern, I'll bet an
     > electric-electric system would be as efficient as anything else
   - the
     > wheel motors become generators while braking, driving a motor which
     > mechanically turns the flywheel - probably gear the flywheel to turn
     > faster than the motor. It might be difficult to design a motor which
     > would survive at the RPM required to make the flywheel efficient
     > (v-squared term dominates). It could be worth trying though as
     > integrating the motor into the flywheel would dramatically simplify
     > the system.
     >
     > The electrical portion of the system is reversed to recover
   power from
     > the flywheel.
     >
     >
     > Matt-
     >
     > Well we shall see as weight is everything in a Formula 1 car.
     >
     > Paul Lamar
     >

   Paul and Group,

   Here is a link to a Kinetic Energy Recovery System by *Torotrak and
   Xtrac*.  The web site says it weighs about 11 lb.


http://www.torotrak.com/Marketing+information/Press/Torotrak+and+Xtrac+announce+new+Licence+Agreement+for+F1+Variator+development.htm

   Norm DeBoer

   "Some of the new KERS systems under development will be mechanically
   based and
   will utilise a flywheel to recuperate, store and subsequently
   discharge a moving
   vehicle kinetic energy, which is otherwise wasted when the
   vehicle is
   decelerated. The kinetic energy is stored during a braking manoeuvre
   and is then
   released back into the driveline as the vehicle accelerates.

   The toroidal traction drive variator, being developed with Torotrak
   and using
   Torotrakâ??s patented technology, is a central element in these
   mechanical
   flywheel-variator KERS systems as it provides a continuously
   variable ratio
   connection between the flywheel and the vehicle driveline, via
   the vehicleâ??s
   gearbox. Torotrak has granted a licence to Xtrac to design,
   manufacture,
   assemble and distribute components or complete variator systems, which
   incorporate Torotrakâ??s technology, to its F1 customers.

   The innovative combination of a Torotrak variator â?? providing
   mechanical
   efficiency that should be in excess of 90 per cent - with a flywheel
   of advanced
   construction, results in a highly efficient and compact energy
   storage system.
   Whilst Xtrac will supply variator units to its customers, the
   flywheels for
   these energy recovery systems are being developed separately by the
   Formula 1
   teams themselves and their specialist suppliers. Torotrak will
   provide the
   control system expertise.

   Torotrak and Xtrac believe that the variator-flywheel solution
   provides a
   significantly more compact, efficient, lighter and
   environmentally-friendly
   solution than the traditional alternative of electrical-battery systems.

   â??The variator weighs less than 5kg [11 pounds] in these
   applications and
   provides a high level of mechanical efficiency, enabling the overall
   mass of the
   mechanical KERS systems to be minimised,â?� says Chris Greenwood,
   technology
   director at Torotrak. â??This mechanical efficiency, combined
   with the variatorâ??s
   ability to change ratio very rapidly, helps to optimise flywheel
   performance.â?�


   Beats the heck out of the silly 300 or 400 pound electricity system
   in the
   Toyota Prius and GM Volt.
Paul Lamar

Didn't Bill Lear build a city bus like this in the 60s? They even
exploded a flywheel to show it would be contained. It was electric
powered with regen braking. It would plug in to city power for 10
minutes at each end of its route to spin up the flywheel. He did a steam
powered city bus as well. Put 9,000 miles on it. The engine would fit in
a full size car.

Lynn E. Hanover

I don't know about Bill Lear but the swiss had a bus like that for awhile.

Guys set your left margin to zero and turn off HTML.
It makes a mess on email.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.