Hi all,
Does anyone have a design for a low-profile adapter block to attach to
the oil filter mount, so a remote filter can be installed? Just curious
to know if I am reinventing the wheel or not.
Thanks much,
John Bell
Some body may have one of those but I don't know who. Jerry Hey could
build
it.
Here are some pictures. I'll ask Al Gietzen where he got his.
Paul Lamar
I drew it up and had a local shop make three. Sold two, used one.
Al
John,
Mazdatrix website found under *oil filters*, also has a small diamond
shaped unit that would be easy to copy and minimalize weight.
Doug in Japan
.
Doug &All,
Early 12A's has a fined aluminum sleeve ( heat sink) that slipped over the
oil filter and that's all it had. Might be an idea to improve some less than
adequate oil cooling systems - just a thought.
George ( down under)
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.