>> Hi all,
>> Does anyone have a design for a low-profile adapter block to attach to
>> the oil filter mount, so a remote filter can be installed? Just
curious
>> to know if I am reinventing the wheel or not.
>> Thanks much,
>> John Bell
>
>
>Some body may have one of those but I don't know who. Jerry Hey could
build
>it.
>Here are some pictures. I'll ask Al Gietzen where he got his.
>
>Paul Lamar
>
>I drew it up and had a local shop make three. Sold two, used one.
>
>Al
>
John,
Mazdatrix website found under
*oil filters*, also has a small diamond
shaped unit that would be easy to copy and minimalize weight.
Doug in Japan.
Here's my oil filter remote adapter. I inch thick, could have a bit more
material cut off for lightness, my new one is just a bit
smaller/lighter, with the oil inlet coming in parallel to the e-shaft,
90 degrees from the way this one comes in.
Brian Trubee
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.