Subject: Wanted low cost box to organize seals
From: Rotary Engine
Date: 9/12/2008, 7:49 AM
To: AAA Put this in the To box


> I am looking for a low cost box to organize rotor seals
>
> It should have at least 15 compartments for all the seals
> on one rotor. It would help if the compartments were labled.
> If would also help if you could seal it up and ship it someplace.
>
> Paul Lamar

I was going to suggest one of those egg crates that hold 2 dozen eggs
until I got to the last criterion.  You could write the label on the
lid.

Bob W.

The problem is the long side seals.

Paul Lamar

-- Hi Paul,
Try Walmart or a sporting goods store.  I found plastic boxes about 9 x
15 x 1.5 with solid partitions running the 15 inch direction. Supplied
with it was a strip of 1.5 x 1.5 partitions you could insert at 1.5 inch
spaced molded-in notches along the 15 inch direction. This combo gives
compartments 1.5 x 1.5 x anything between 1.5 and 15.  I think they are
made for fish hooks and sinkers up to spoons and plugs. Great for nuts,
washers and bolts up to 15 inches long. They're made by "PLANO" --the
tackle box people.  Dave M


I'll give Walmart a try. Thanks

Paul

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.