Subject: Wanted low cost box to organize seals
From: Rotary Engine
Date: 9/13/2008, 5:20 PM
To: AAA Put this in the To box



> I am looking for a low cost box to organize rotor seals
>
> It should have at least 15 compartments for all the seals
> on one rotor. It would help if the compartments were labeled.
> If would also help if you could seal it up and ship it someplace.
>
> Paul Lamar

Hate to suggest this:
8.5X11" paper with markings to identify the rotor face of origin.  (e.g.
front rotor, gear side + kanji letters to id the corners)
3 pieces of clear packing tape to hold the oil scraper rings/seals in
their position.
old shoebox

leave some film of oil on stuff in case they sit for years.

~Cary

I am thinking of having some vacuum formed out of thin transparent plastic
in the shape of a rotor. One box per rotor side. They will also hold the
oil scraper rings and springs.

The price should be cheap once the mold is made. Perhaps a couple of bucks.
You will need four per two rotor engine.

If somebody wants some let me know as it is as cheap to make 100
as it is to make 10.


Paul Lamar
Hi Paul,
If you're going to mold "boxes", mold in some feature that will agree
with a feature on the rotor to allow rotational oreintation. IE. The
rotor can be indexed into 3 positions, but you want the seals to go back
into the same place they came out of, not one of the other two possible
places.  Dave M
-- 

Yes I have done that but you will need a four boxs one for each face
of the rotor.

Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.