GREG FLEMING wrote:
Forgive me if this has been discussed before, but does anyone see merit in
using the Evans NPG waterless coolant?
http://www.evanscooling.com/main21.htm
Since this liquid's boiling point is much higher than regular 50/50
water/glycol, there is no boiling, meaning no pressure in the cooling
system. No pressure from steam, that is. Not as much pressure on the
hoses, clamps, fittings, etc. Also appears to give better cooling
properties.
Anyone heard of this stuff?
Greg in Canada
People have tried it and it seems to work. In theory the conductivity
between metal and coolant is not as good as metal to glycol and water.
Paul Lamar
Shouldn't that require more radiator area? The benefits of
low-pressure operation are apparent though. Water-based cooling
systems must have to be pressurized a lot at higher altitudes to keep
boiling point up.
-Chris
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.